Bench Vises - 4 - Page 2 - Extreame Savings! Save up to 47%

mpn: 2MWS,

Rare Earth magnet attaches anywhere on the work holding setup without the need for connecting bolts or screws.Fast, accurate positioning of parts. Removes quickly to clear spindle travel when necessary. 18 lbs. pull.

You Save: 46%

mpn: HD CSV-3, ean: 0789755000021,

The Yost HD CSV-3 is a 3” Cross Slide Vise. Made from cast iron, this vise is designed for regular use on your drill press. The cross slide function of the vise allows you to quickly drill multiple holes in a product without re-clamping your project each time. Adjustable screws on the slides allow you to adjust the vise for optimal performance. Use this vise on your drill press for quickly drilling a series of pre-marked holes.3-Inch wide Jaws. Dovetailed ways; Adjustable gibs. Fixed Jaw V

mpn: D3125, ean: 0769433431255,

Includes Factory Warranty. Includes Full Warranty.

You Save: 14%

mpn: 3900-1730, ean: 0769053020624,

HHIP grooved jaw drill press vise. 1.5-inches jaw opening. Jaw measures 1.5-inches width by 1-inches depth. 5.25-inches overall length.Drill press vise. Grooved jaw. 1.5-inches jaw opening. Jaw measures 1.5-inches width by 1-inches depth. 5.25-inches overall length.

You Save: 47%

mpn: 204, ean: 0729315204001,

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 204 NEOPRENE PADS FOR USE WITH (201 & 203). Protect the finish of your project with these add-on Jaw Pads. Neoprene Pads slip over the existing jaws and are soft and gentle, with plenty of holding power!

mpn: D4327, ean: 0754001002487,

The heavy cast iron wood vise with polished guide rods have quick release levers that disengage the screw for fast and efficient operation. They also feature sliding dogs for securing long workpieces to the bench and disappear out of the way when not in use.7-inch jaw width. Mounting height (workbench thickness) 2-1/4-inch. 8-inch max jaw opening, 21 lbs.

mpn: 6XK001,

Brand new heavy duty 4'' cross drill press vise, turn your drill press into a milling machine. Condition: Brand new Color: As picture shown Material: Heavy Duty Steel Vise Travel: 5 1/2'' Jaw Width: 4'' Base Size: 9'' X 5'' Maximum Jaw Opening: 3-1/2'' P Precision threaded clamping and cross slide screws Removable handles for easy slide on and off Package includes: 1 x 4'' Cross Drill Press Visework piece in horizontal and longitudinal for precise positioning.. Heavy-duty cast steel

SKU: #PANAVISE303

You Save: 12%

sku: PANAVISE303, mpn: 303, ean: 0729315303001,

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 303 STANDARD HEAD, our best selling general purpose Vise Head. Perfect for hobbies, electronics and small home repairs! Select the 300, 305 or 380 Base and create your own versatile vise. Jaws are 2.5-inch

You Save: 20%

mpn: 9-51856, ean: 0009518560006,

The Craftsman 9-51856 6'' bench vise features reversible jaw faces, which are smooth on one side for no-mar gripping, serrated on the other for a secure hold. A rapid-acting vise screw provides fast opening and closing. V-grooves provide extra gripping strength, and precision machined anvil is designed for incredible strength and high performance.Reversible jaw faces are smooth on one side for no-mar gripping, serrated on the other for a secure hold. Rapid-Acting vise screw for fast opening and

mpn: 104J3, ean: 0819682011675,

This swivel head table vise from Hobby Tool Supply is a great addition to any home workshop or garage. It features 3'' wide rubber coated jaws to help protect your items from scratching or marring, which open to approximately 2 inches, providing ample space for most small jobs. The rubber can be removed to reveal a cross pattern groove to help secure wire or other cylinders. The ball and socket joint can be locked at nearly any angle, providing you with unparalleled versatility. The attached

mpn: 904-HV, ean: 0789755000854,

The Yost Vises 904-HV 4'' high-visibility all-steel utility combination pipe and bench vise with 360-degree swivel base mounts to a workbench to provide light-duty clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The cast steel body has been painted with safety-yellow paint for visibility and has a flat portion that acts as a reinforced anvil and additional work surface. Both

mpn: 3900-0022, ean: 0769053015163,

Oil hardened. Precision Ground. Rapid positioning notches. .00025'' square and parallel.Jaw Width 2''; Jaw Depth 1-1/4''. Jaw Opening 3''; Length 6''. Oil hardened. Precision Ground.

mpn: 12169, ean: 0819300012169,

Made of High Quality Alloy Steel1 Hardened and Ground from Stabilized Stock Two Holes in Each for Easier Handling +/- .0003'' in Parallelism Paired +/- .0003'' in Height1 Pair 3/16'' x 1'' with 5/16'' Hole. 1 Pair 3/16'' x 1-1/2'' with 7/16'' Hole. 1 Pair 3/16'' x 1-1/4'' with 3/8'' Hole. 1 Pair 3/16'' x 1-3/4'' with 1/2'' Hole. All are 6'' Long and and 3/16'' Wide or Thick.

mpn: VMAG4soft, ean: 0857825004436,

NO-M.A.R® V groove magnetic soft jaw pads are a great way to securely hold your polished or finished metal round stock without the risk of leaving marks or scratches. Perfect for holding chrome Heim joint linkages, anodized tubing or non-tapered rifle barrels in place when you need an extra hand. The 4'' soft jaw pads will easily fit any bench vise from 3 to 6 inches wide and stay in place firmly with the neodymium magnets permanently fixed into the backside with screws rather than glue or

mpn: 3900-0202, ean: 0789957258312,

HHIP Tools provides the finest quality tools and their goal remains in providing you highest quality products.3/4'' Hex Hub. Fits most milling vises. Designed For 6'' Milling Vise.

mpn: 6XK002,

Brand new heavy duty 5'' cross drill press vise, turn your drill press into a milling machine. Condition: Brand new Color: As picture shown Material: Heavy Duty Steel Vise Travel: 7'' Jaw Width: 5'' Base Size: 9'' X 5'' Maximum Jaw Opening: 4.75'' Precision threaded clamping and cross slide screws Removable handles for easy slide on and off Package includes: 1 x 5'' Cross Drill Press Visework piece in horizontal and longitudinal for precise positioning.. Heavy-duty cast steel

mpn: 53994, ean: 0020209539941,

Mount the TEKTON 4 in. Drill Press Vise to your drill press table and get professional results with perfect hole placement every time. Whether it's a wood, metal, or plastic part, you can work better, faster and safer knowing it's properly secured and won't shift or twist. Made from 30,000 PSI cast iron, durability and dependability are built in. The sure grip of replaceable steel jaws is evenly distributed across workpiece surfaces, preventing slipping or crushing. Polished top surfaces are

ean: 0610822691227,

The Classic Rotary Vise is a high quality rotating vise with a great cost. 360 degree rotation with ultra fine jaws. Table clamp is included. This is a great value for a high quality vise.Classic Rotary Vise. 360 degree rotation. Ultra fine jaws. High quality. Great price.

mpn: 28608, ean: 4006274286085,

Precision Vise FMZ, with clampSwivel head rotates in all directions (even down, in front of the workbench). Precision steel jaws are supplied with vertical and horizontal V-slots for securing round work pieces, too. 3-Inch wide jaws open to a clamping width of 2-3/4-Inch (70 millimeters) and are equipped with removable rubber covers to protect delicate work pieces from damage.

mpn: TLCOMBOANVIL, ean: 0654207122906,

Our bench pin and anvil clamps onto any bench up to 2'' thick and offers the combination of a milled, smooth anvil with replaceable wooden pin.Ideal for the jeweler's workbench. Wooden pin and anvil. Can clamp onto any bench up to 2 inches thick. Offers the combination of a milled, smooth anvil with replaceable wooden pin. Comes with 1 anvil and 1 pin.