Center Punches - 100 - Page 2 - Blowout Sale! Save up to 52%

ean: 0814310014837,

Personalize your work with this quick and easy punch set. No hammers or mallets needed here, just place one of the numbered or lettered punches into the spring loaded brass handle and press into wood. The tension on the brass handle is adjustable for impression depth. The punch set can be used on wood or even soft metals.Adjustable spring loaded brass handle. 26 letters (A-Z) and 9 numbers (0-9). 1 decimal point and 1 ampersand. molded plastic storage case. Letters are approximately 4mm tall by

You Save: 11%

mpn: P-42, ean: 0662459284952,

The JH Williams P-42 1/2-Inch center punch has an overall length of 6-Inches and is constructed of heavy duty industrial grade steel. It pierces or marks the work by indentation for starting pilot drills in metal or other materials.1/2-Inch punch. Center punch. Overall length of 6-Inch. Heavy duty industrial grade steel. Pierces or marks work by indentation for starting pilot drills in metal or other materials.

You Save: 7%

mpn: 816D, ean: 0049659530469,

The Starrett 816D prick punch is 4'' long and has a 5/32'' diameter tapered point. The point is sharp for precise placement of a drill bit. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shank is round and knurled for grip.Center and prick punches are used to make a dimple mark in materials to guide a drill bit. Manual punch hand tools have a metal shank and a shaped or flat point that is typically tapped with a ball-peen hammer to make a

mpn: 50120,

Punches have a mechanism which automatically strikes a blow when downward pressure is applied.Universal polarity.. Used by machinists and carpenters.. Rugged automatic punches have all-steel handles and parts.. The point can be easily removed for regrinding and/or replacement.. Capable of striking a much heavier blow than the other sizes..

You Save: 10%

mpn: J411/2, ean: 0662679010041,

Stanley J411/2 Center Punch Used in metal working layout. Provides a broad dent in marking intersecting center lines, hole locations and pilot drill starting points. Modified parabolic striking end for greater resistance to mushrooming and chipping.Used in metal working layout. Provides a broad dent in marking intersecting center lines, hole locations and pilot drill starting points. Modified parabolic striking end for greater resistance to mushrooming and chipping.

ean: 7284611794784,

Hi There! This is a Coin Ring Center Punch For Golden/Presidential Dollar! The punch set can also fit a Russian 5 Neba coin as well. The coin is slightly smaller but you can use tissue paper to tighten the fit on the Russian 5 Neba coin. The punch body is fitted to the Golden/Presidential Dollar and comes with a 1/2'' punch and die set. The punch is made from O1 Tool Steel, 2 inches long. Hardened, and hollow ground, and has a relief, to make it easier to get the coin back off.The die is also

You Save: 14%

mpn: 985-113, ean: 4946368595061,

'Automatic Center Punch, Length 6 In, Body Dia 1 In, Number of Pieces 1, Body Material Plastic, Adjustable, Replaceable Point, Point Carbide, Finish Green'Price For: Each Adjustable: No Material: Plastic/Steel Item: Automatic Center Punch Number of Pieces: 1 Finish: Green Replaceable Point: Yes Point: Carbide Length: 6'' Diameter: 1'' Blow Force: - Includes: - Country of Origin (subject to change): Japan.

mpn: HK2016367,

Suitable For:Wood Drilling Packing Included: 1 x Punch locator(With threaded rod 8/10mm and 15mm Eccentric drill bushing) 1 x 8/10/15mm drill bit (with stop ring) 1 x wrench as Half moon 1 x Allen wrench 1 x Tool BoxMaterial: Aluminium Alloy(6061). Surface Treatment: Anodized. Abrasion resistance, long service life. Scale: Laser engraving (non-screen printing, prolonged use of the mark will not wear). Punching a 8mm thread rod hole and a 15mm eccentric wheel hole. Adjusting range of

You Save: 13%

mpn: P-40, ean: 0662459284945,

The Snap-On JH Williams P-40 3/8-Inch center punch has an overall length of 5-Inches and is constructed of heavy duty industrial grade steel. It pierces or marks the work by indentation for starting pilot drills in metal or other materials.3/8-Inch punch. Center punch. Overall length of 5-Inch. Heavy duty industrial grade steel. Pierces or marks work by indentation for starting pilot drills in metal or other materials.

You Save: 4%

mpn: 264B, ean: 0049659512793,

The Starrett 264B center punch is 3-1/2'' long and has a 3/8'' thick square shank with a 5/64'' (2 mm) diameter tapered point. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shank is knurled for grip and has a square shape to prevent it from rolling when placed on a work surface. Center punches make small dimple marks in a workpiece to help guide a drill bit. Manual center punches have a metal shank with a point and are typically tapped

mpn: 430 231, ean: 4049002096938,

RENNSTEIG 430 231 180-250n Size, 5 1/4 length, high alloy tool steel Material, automatic adj. center punchTop Quality.

mpn: 565-149-5/8, ean: 0096685010243,

The name C.S. Osborne has been synonymous with quality since its founding in 1826. Generations of leather craftspeople have turned to this trusted line of tools time and time again for professional results on every project. Now operated by the seventh generation of the Osborne family, this company adheres to proven, age-old quality standards that are evident in every tool. These standards have served leather crafters well throughout the company's history, as proven by the well-loved tool

You Save: 52%

mpn: 479-24003, ean: 0045256240039,

Mayhew Tools Center Punches - Full Finish - 24003Finish - Black Oxide. Material - Alloy Steel. Overall Length - 6 in. Quantity - 12 per box. Stock Shape - Hex.

mpn: EDN-PNE-554806, ean: 0619922790519,

Promax center finder, finds the center in seconds. No moving parts, no calculations and high precision. Gives the center of round, squarehexagon and octagon stock. Great for determining the center in stock for turning in lathe or other purposes.No moving parts, no calculations. High impact plastic material. Up to 8-Inch circle, square and octogon stock. Up to 5-3/4-Inch hexagon stock. A simple 2 step process finds your center.

SKU: #51284

You Save: 21%

sku: 51284, mpn: 264G, ean: 0049659512847,

The Starrett 264G center punch is 5'' long and has a 7/16'' thick square shank with a 1/4'' (6 mm) diameter tapered point. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shank is knurled for grip and has a square shape to prevent it from rolling when placed on a work surface. Center punches make small dimple marks in a workpiece to help guide a drill bit. Manual center punches have a metal shank with a point and are typically tapped with a

You Save: 5%

mpn: AJXA913, ean: 0697041006643,

Ajax sets are designed with the professional in mind. From the Master mechanic to the body specialist, these sets are used in a wide range of professional applications.Ajax sets are designed with the professional in mind. From the Master Mechanic to the body specialist. These sets are used in a wide range of professional applications. On purchase our product, you are getting the highest quality.

mpn: LNS-36W, ean: 0789398118527,

This HFS (R) set of punches will easily imprint letters and numbers into steel, wood, plastic, leather, and many other materials. Using the punch and a hammer you can imprint codes. names, or many other meanings into your items. The storage box allows for easy organization and transportation of the entire set. Includes with the set are the following punches: Set Includes: (26) Letter Stamps: A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, X, Y, Z (1) Symbol Stamp: & (9) Number

You Save: 35%

mpn: 79P, ean: 0735090690540,

The General Tools and Instruments 79P Professional Automatic Center Punch 79 Replacement Point replaces a damaged or worn point on the 79 P. The 79 is an automatic center punch that punches, marks, scribes and starts drill, nail or screw holes. The spring tensioner adjusts depending on how hard and deep you need the mark to be. The tool is made of an all steel body, the points are hardened steel. Replacing the worn out point is easy, as both the original and replacement are threaded.GENERAL

mpn: 65-171R, ean: 5012095431459,

Delivers a punch when hand pressure is applied to the knurled head. This tool is design to be a one handed operation (hammer should not be used). Depth of impression can be adjusted by turning the knurled head.One handed operation (hammer should not be used). 4-11/16'' overall length, 30-5 operating pressure range. Depth of impression can be adjusted by turning the knurled head. Delivers a punch when hand pressure is applied to the knurled head. Works on metal, plastic, wood and other

ean: 7284611794470,

Hi! Up for sale is one, U.S. 50 cent coin Center punch set. I MAKE COIN RINGS AS WELL. I have punched out over 200 plus coins with this same punch design and Same Punch, still truckin!! The punch body is fitted to the 50 cent coin and comes with 1/2'' punch and die set. The punch is O1 Tool Steel, 2 inches long. Hardened, and hollow ground, and has a relief, to make it easier to get the coin back off. The die is also O1 Tool Steel, hardened, and relief ground, so your blank falls out. This is