Center Punches - 100 - Page 3 - Blowout Sale! Save up to 70%

mpn: Gen-2101, ean: 7284611794234,

Hi! Up for sale is one, U.S. Quarter Center punch set. I MAKE COIN RINGS AS WELL. I have punched out over 200 plus coins with this same punch design and Same Punch, still truckin!! The punch body is 24.3mm I.D., for U.S. Quarters, and comes with 1/2'' punch and die set. The punch is O1 Tool Steel, 2 inches long. Hardened, and hollow ground, and has a relief, to make it easier to get the coin back off. The die is also O1 Tool Steel, hardened, and relief ground, so your blank falls out. This is

You Save: 70%

mpn: USXILKO_0232,

Features: The drill uses high-speed steel titanium alloy for titanium coating surface treatment, suitable for workpieces with a hardness of less than 25 degrees. Hexagonal shank titanium alloy drill bit is very suitable for punching various materials such as steel, brass, wood, plastic, etc. It can also be widely used in thin iron plate, aluminum plate, insulating plate, PVC plate and other thickness less than 5mm. Automatic center stamping, by adjusting the cap, provides spring impact when

You Save: 10%

mpn: CP0399, ean: 0789957388606,

Galvanized carbon steel band offers medium strength with medium corrosion resistance to mild chemicals and occasional fresh water. Center Punch clamps use a punch style clamp for economy and ease of installation. For general plant maintenance or emergency field repairs. BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies. Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or

mpn: 14517,

Optical Center Punch. Layout and Drill Hole Patterns Easily & Accurately. Set Contains: Precision Guide Base With scratch Protection. Two Spotting Lens': one With Center dot and circle, and one With cross-hair for easily lining up the Punch as close as ±.001''.60º and 120º Center punches made of hardened tool steel.. Comes complete in a fitted wooden case.

mpn: 565-149-7/8, ean: 0096685010328,

The name C.S. Osborne has been synonymous with quality since its founding in 1826. Generations of leather craftspeople have turned to this trusted line of tools time and time again for professional results on every project. Now operated by the seventh generation of the Osborne family, this company adheres to proven, age-old quality standards that are evident in every tool. These standards have served leather crafters well throughout the company's history, as proven by the well-loved tool

SKU: #WILW750

You Save: 52%

sku: WILW750, mpn: W750, ean: 0395641076416,

Cold Chisel sizes: 3/8, 1/2 and 5/8''. Center Punch sizes: 3/8''. Taper punch sizes: 1/8 and 3/16 x 6''. Pin punch sizes: 3/16 x 6''. Hardened and tempered high carbon steel construction. Vinyl covered shank absorbs shock and reduces vibration. Handy storage pouch. Versatile machinist's file can be used on metal, plastic, and woodCold Chisel sizes: 3/8, 1/2 and 5/8''. Center Punch sizes: 3/8''. Taper punch sizes: 1/8 and 3/16 x 6''. Pin punch sizes: 3/16 x 6''.. Hardened and tempered high

You Save: 20%

mpn: S828HZ, ean: 0049659530643,

' Wiggler/Center Finder Set, Disc Dia 0.100 In, Ball Dia 0.250 In, Shank Dia 0.375 In, Length 4 In, Tool Steel Construction, Includes Pointed Shank, Ball and Disc Contacts, Offset Indicator Holder, Case 'Includes four attachments: Ball Contact, Disc Contact, Offset Indicator Holder. Includes Case.

mpn: 430 229 RT, ean: 4049002044748,

Adjustable automatic center punch in round plastic tube with shank of Ø 0.43 inch (similar to 11mm) for striking force 20-50N Product Features: - For dot marking on steel, NF metals and plastics - Impact strength is adjusted by rotation of the knurl - Spring loaded self striking mechanism - Activated by downward pressure (you don't need a hammer) - Precision design - Impact force adjustable - Two-component hand guard - Nickel plated finish - Machine steel This is an industrial tool,

mpn: D3745, ean: 0769433437455,

Steelex Heavy-Duty Automatic Center Punch D3745Spring loaded. Hrc 55-58 alloy steel point. Single handed operation. For use on wood, metal or plastic.

You Save: 29%

mpn: 77, ean: 0080050277157,

General Tools 77 5/8'' Ball Bearing Automatic Center PunchOne-handed spring impact operation; no hammer needed. Spring tension adjusts for light or heavy strokes and marking. Lightweight aluminum body with knurled finger grip and duable alloy steel parts. Hardened steel point.

You Save: 47%

mpn: PPU1001, ean: 5060030660129,

Modelcraft 1-Piece Auto Centre PunchAutomatic Centre Punch. Heavy knurled body for easy handling. Hardened and ground punch point. Adjustable tension.

mpn: USTRCON, ean: 7285843471672,

Hi there This listing is for (one) Universal Tool Steel Starter cone! It can be used on all coins with a center hole from 1/4'' to 5/8'' to begin the folding process! It is small so it can also be used with ring sizing machines that have a low clearance and presses! This tool will also help protect your other folding tools like Delrin balls because the first fold is the hardest on those types of tools! TO USE THIS TOOL: First begin with a coin that has a center punched hole and you will need to

mpn: S264WB, ean: 0049659512854,

The Starrett S264WB set includes seven center punches with a square shank, and 1/16'', 5/64'', 3/32'', 1/8'', 5/32'', 3/16'', and 1/4'' diameter tapered points. The set comes with a round red plastic case for storage. Each punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shanks are knurled for grip and have a square shape to prevent them from rolling when placed on a work surface. Center punches make small dimple marks in a workpiece to help

SKU: #2495-0073

You Save: 10%

sku: 2495-0073, mpn: 38R04-1, ean: 0761751000021,

Force = mass x acceleration this has been a simple yet very powerful concept since isaac newton’s time. At Spring Tools, we create tools based on this principal. Our tools are about the size of a ball point pen yet have over 3500 lbs of striking impact and use No other outside force such as a hammer. Simple is good the spring tool concept is designed to re-direct energy in a very concentrated area between (2) very strong carbon steel pieces that are permanently connected by a spring made out

mpn: JA-MINI, ean: 0791617732360,

This small mini awl can be easily cupped in the hand allowing more control for precise work. It is perfect for marking and making starting holes for smaller screws when making boxes or other small projects. It can also be used to mark a line against a rule or pierce small holes in thinner material. Overall length is 3 ¾'' and is .550'' in diameter. The blade is made from hardened high carbon tool steel and ground to a very fine point. This awl is a pleasure to hold and use.This small compact

mpn: 32R00-1, ean: 0761751000076,

32R00-1 Double ended prick punch & venter punch. Hammerless technology for superior results .Prick punch end utilizes small cylinder for controlled slight indentation for spot marking .Center punch end utilizes large cylinder for max impact that creates deep indentation for drilling .3500 lbs of impact striking force. Patented design is safe and easy to use .Combination action works on any material. Unrivaled precision and control .32R00-1 Double ended prick punch & venter punch. Hammerless

You Save: 15%

ean: 0605668210824,

Center punch and Chamfering drill bit set:  Complete set of tools equipped with various sizes of drill bit, good for sinking 90 degree  countersink bit holes into wood and soft metals countersunk screws and fixings.  Marvelous design:  The 1/ 4 inch hex shank drill is made of sturdy and durable material, coated with brass and  titanium to prevent rusting, fine for a quick change, won't slip in drill chucks.  Features: 1. Made of advanced 45# standard high-carbon steel with super-hard

You Save: 3%

mpn: RN430229, ean: 0043099453104,

RENNSTEIG 4'' automatic center punch. Made in Germany by RENNSTEIG, a premier European manufacturer of professional, high quality screw extractors, punches, cold chisels, cutting, crimping and stripping tools.Made of machine steel with spring loaded self-striking mechanism. Impact strength is adjusted by roation of the knurl. Replaceable hardened pin w/ two-component hand guard. Nickel plated finish. Made in Germany.

mpn: 201712011151,

MAZU Automatic Spring Loaded Center Punch Tool Feature: ✎This light weight, aluminum center punch is perfect for marking a variety of materials. ✎Its non aggressive and unnoticeable design makes it fit comfortably in to the pocket or a tool belt. ✎It's spring impact operation makes this even more flexible, as it can be easily adjusted to accommodate both light and heavy markings. ✎This multi-faceted tool stores easily in your car's console or door panel and is compact enough to carry

SKU: #681-53048

You Save: 15%

sku: 681-53048, mpn: 818, ean: 0049659530483,

The Starrett 818 automatic center punch with adjustable stroke is 5'' long with a 5/8'' (16 mm) diameter for creating a starter dimple without the need for a hammer. Internal parts and the punch point are made from hardened tool steel for wear resistance, and the handle is made from 818 aluminum alloy for lighter weight than all-steel punches. The punch has an adjustable stroke, which can be set by turning the knurled cap. It also has a built-in mechanism to center the dimple. The point can be