Punches - 26 - Blowout Sale! Save up to 63%

You Save: 27%

mpn: 10051501, ean: 7466655952942,

The D914 series punch down tool provides quality terminations on the first punch, helping to achieve the highest quality possible on network installations. It's the only impact tool that combines torque and impact in one tool. It also includes a built-in hook and spudger into the handle. Use the hook to remove wires from any style block or to help trace wires. Use the spudger to remove the cross-connect module from the mounting bracket. Quick and easy blade replacement, and extra blade storage

You Save: 63%

mpn: WSLP1, ean: 7147905962675,

Length (Inches) (Inch): 11-Inch Finish On Handle(S): Red Vinyl Grip. Forms Tabs To Secure Vinyl SidingForms Tabs To Secure Vinyl Siding Or Plastic Skirting To Finishing Trim. 3/8-Inch Throat. Vinyl Handle Grips For Added Comfort.

mpn: 8988, ean: 0688295878988,

Accurately locate exact drilling centers and guide drill bits perfectly perpendicular to your woodworking piece with the DCT Standard SAE Drill Bit Guide Set. Use the disc-shaped recess on the bottom of the drill guide for spheres and the V-shaped groove for cylinders and edges. Drop the included locating pin inside the 3/16-inch bushing with the flat top of the pin going into the bottom of the bushing first (do not attempt pointed tip end into bushing) and then center over the spot to drill.

SKU: #HH-24813016

You Save: 18%

sku: HH-24813016, mpn: 150, ean: 0008298203134,

The Council Hookaroon is an effective tool for moving logs and firewood that is indispensable in handling timber and firewood. HOOKEROON WITH 36'' CURVED WOODEN HANDLE NOTE The Hookaroon features hickory wood handle that firmly grabs wood, allowing to drag it without efforts. Pick shape is designed to stick and pull boards and lumber in saw mills and woodworking applications.Heat treated working end produces fine grain structure and Rc 45-55 (Rockwell Hardness Values) for safety, edge holding

You Save: 13%

mpn: EPD-91461, ean: 0811490014947,

Punchdown Tool Sleek ergonomic design for easy effective wire termination. Features include: Hi/Low impact setting , combination Hook/Spudger stored in the chassis, Color coded yellow on the CUT side, Enlarged blade storage compartment. Use to properly set, seat and terminate wire. Simply position the wire, push tool, and listen for confirming pop. Wire is properly seated.Hi impact for 22 AWG; Low impact for 24-26 AWG. Includes 1 each: 66 & 110 Blades. Combination Hook/Spudger stored in the

mpn: 43237-2, ean: 6957546802626,

Description The Hole Punch is deal for belts, bags, saddlery, shoes, pet collars, store cards and many different craft projects. We think you will love it! Professional quality with the strength and precision you demand, the Hole Punch is designed to make light work of tough jobs. It will cut neat holes in many different types of material including leather,plastic,canvas,cardboard,shoe,rubber&polyurethane - and with 6 different holes sizes to choose and a large punch plate for stability. It

You Save: 16%

mpn: 66556, ean: 0020209013946,

To align pieces for accurate assembly, fastening, or welding, drive the punches in the TEKTON 3-pc. Long Alignment Punch Set through holes in two or more parts. They have a gradually tapered self-centering nose that creates the mechanical advantage to position even heavy parts with smooth control. Generous in length, they offer extra leverage and extended reach through thick pieces or past obstructions and provide the room for a two-handed grip when needed. The tips and tapered shafts are

SKU: #208139

You Save: 15%

sku: 208139, mpn: 28R45-1, ean: 0761751000212,

Force = Mass x Acceleration This has been a simple yet very powerful concept since Isaac Newton’s time. At Spring Tools, we create tools based on this principal. Our tools are about the size of a ball point pen yet have over 3500 lbs of striking impact and use no other outside force such as a hammer. Simple is good: The Spring Tool concept is designed to re-direct energy in a very concentrated area between (2) very strong carbon steel pieces that are permanently connected by a spring made out

You Save: 5%

mpn: 1280ST, ean: 0038728438966,

This hollow steel punch set provides tools for making various sized holes, includes 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', and 1/2'' hole punches in a convenient plastic roll pouch. The punch works on leather, rubber, gasket material, cardboard and softer metals. The internal punch features a side clearance hole for easy removal of punched material. The punches are heat treated forged steel, ensuring long lasting performance. Because of this heat treatment, the cutting edge will stay sharper

You Save: 42%

mpn: 444, ean: 5020581244735,

Clear plate guide for easy alignment. Made from precision ground hardened alloy steel. Accurate to within 0.002''. Includes nine punches: 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'' & 3/4''. Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass. Includes blow molded storage case. INITIAL ADJUSTMENT If you find the punches have a tight fit, are difficult to insert through the clear plate guide and cannot be moved by firm hand pressure, turn over the punch & die set and

mpn: 16148, ean: 6202639793849,

The Titan Tools 148-Piece Master Bit Set contains the following tools: 70pcs. - 25mm Bits: • (12) Slot: 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.6, 7, 8mm • (8) Phillips: #00, #0, #1, #2, #2, #2, #3, #4 • (8) Pozi: #00, #0, #1, #2, #2, #2, #3, #4 • (12) Hex: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8mm • (10) Hex: 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4'' • (13) TORX: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45 • (3)

mpn: PIN-225.05, ean: 0654207177722,

EURO TOOL is proud to present this wire rounder set. The set has two different sized 'cups' and a pin vise to hold your 'cup-rounders'. This set includes our new PIN-224.00 Wood Top Pin Vise and two cup burs. One bur has an inside diameter of 1.2mm and the other a diameter of 1.8mm. The pin vise has a comfortable round wood top and a knurled, cross-hatched neck for secure grip and comfort. To properly use a 'cup bur': Start by assembling the pin vise with a size appropriate collet and a cup bur

You Save: 38%

mpn: T690031001122-1,

Description:Twod Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.As a bonus, this set comes with an awesome pin holder case.These have an elevated pilot point tip which makes it line up on the roll pin for a nice easy removal of the roll pin.This set is ideal for repairing or servicing

SKU: #36004

You Save: 26%

sku: 36004, mpn: AG1502FZ, ean: 0092329002780,

Introducing, the Flexzilla Series of Blow Guns and accessories. Flexzilla features an ergonomically superior gun body for maximum comfort and control which reduces operator fatigue. A variable flow trigger regulates air volume precisely with maximum flow, equal to or greater than the competition. Unique to the Flexzilla blow guns and accessories is the modular accessory system, allowing you to customize the gun extension length and tips for every application. Flexzilla blow guns meet or exceed

mpn: TNP2R, ean: 0686046526744,

Trim Nail Punch with Retaining Clip For easier nailing from any angle or height, Malco offers a Trim Nail Punch with an exclusive, ''nail retaining clip'' feature. Avoid the awkwardness and strain of balancing nails in the nose of the punch or holding back the drive pin while standing on a ladder or reaching out to nail. The new retaining clip also minimizes scrapes and dents caused by nail slippage or improper setting depth.Nail retaining clip holds nail securely while positioning punch. Avoid

SKU: #412-9810

sku: 412-9810, mpn: 9810, ean: 0844278098105,

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in

mpn: ZAK-57K, ean: 0971475949333,

This tool is a window punch designed to hang on a key ring. It facilitates breakage of safety glass allowing you to immediately extricate victims of automobile accidents. Simply press and hold the pointed end against any auto safety glass. Pull back the triggering device and release. Safety glass is immediately smashed out.Key ring on one end. Window punch on other end. Spring loaded. Simple, reliable & convenient.

You Save: 63%

ean: 0699747921237,

Package: √Professional Punch Plie×1 √Stainless steel scissors ×1√Screwdriver×1 √File×1 Professional Belt Hole Puncher Kit is a Smart Choice for Home & Craft 1. Revolving Punch Plier Kit, The unique design allows for use with one hand, especially useful as a leather hole punch. 2. Convenient spring tension gives superior power and comfort, fits your palm and allows for maximum force output. 3. Comfortable design for easy punching and less hand fatigue.4. 6 hole sizes: Great for

You Save: 6%

mpn: 13016, ean: 0766955320012,

Kit contains nine alignment tools constructed from a special nylon type material that cannot retain a static charge. Kit includes: 0.050'' nylon hex, 3/32'' steel slotted; 0.085'' steel slotted, 0.085'' recessed steel slotted; 1/32'' nylon slotted, 1/8'' recessed steel slotted; 1/32'' slotted nylon tips; 1/32'' square, 0.100'' hex; 1/8'' steel slotted, 1/8'' recessed steel slotted; 2x 5/64'' nylon hex; 5/64 hex, 0.100'' hex. Ideal for electronic or TV technicians, or for adjusting conventional

You Save: 20%

mpn: 729, ean: 0100069429825,

This 29 piece punch and chisel set includes (7) pin punches: 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch, 5/16 inch and 3/8 inch, (6) starter punches: 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch and 5/16 inch, (4) center punches: 1/4 inch, 5/16 inch, 3/8 inch and 1/2 inch, (7) flat chisels: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch, (2) cape chisels: 1/4 inch and 5/16 inch, (1) half-round nose chisel: 5/16 inch and (2) diamond point chisels: 5/16